Product description:
HDPE is a white granular product. Non-toxic, tasteless, crystallinity
was 80% ~ 90%, softening point is 125 l ~ 35 ºC, using temperature is 100 ºC;
Hardness, tensile strength and creep are better than low density polyethylene.
Good wear resistance, electrical insulation, toughness and cold resistance;
Good chemical stability, at room temperature, insoluble in any organic solvents,
acid, alkali and various kinds of salt corrosion resistance; The film has little
permeability to water vapor and air and low water absorption. Aging resistance,
environmental stress cracking resistance is better than low density
polyethylene, especially hot oxidation will make its performance degradation,
so must be added in the resin antioxidant and uv absorber, etc to improve the
deficiency of. The heat deformation temperature of high density polyethylene
film is low under stress.
Properties:
HDPE is a white powder or granular product.
Applications:
Extrusion, injection molding, PE80, PE100 grade PE rigid or soft pipe ,water pipe, gas pipe
Technical Index:
Item |
Test Method |
Value |
Unit |
Density |
ISO 1183 |
0.946-0.952 |
g/cm3 |
MFR |
ISO 1133 |
0.15-0.45 |
g/10min |
Tensile strength at yield |
ISO 527-2 |
21min |
MPa |
Elongation at break |
ISO 527-2 |
300min |
% |
Tensile modulus |
GB/T 1040.2-2006 |
1000 |
mpa |
vicat softening point |
ASTM D-1525 |
126 |
°C |
thermal stability |
GB/T 19466 |
20min |
min |
Package:
Business Corner: